BETTER, MORE ACCURATE
With years of experience in the dental industry, the upgraded AccuFab-D1s offers users a more intuitive and user-friendly workflow with even faster print speed and better accuracy.
This is the ideal printing solution for all dental customers wishing to enter into the era of digital production.
Featuring a large build volume of 144 x 81 x 160 mm and a fast print speed of up to 50mm/h, you'll be able to print 4 arch models in an hour or multiple surgical guides in less than 30mins.
AUTO-LEVELLING BUILD PLATE
The clip-in clip-out auto-levelling build plate saves time and ensures repeatable and successful results.
100,000 LAYERS PER TANK
With a long lifetime resin tank, the AccuFab-D1s reduces operation costs.
The resin tank can be used for 100,000 layers of printing.
The integrated advanced printing software supports intelligent support creation and "one-click" printing, providing a doctor-friendly experience with repeatable consistency and accuracy.
SLEEK MODULAR DESIGN
The Accufab-1Ds features a modular design making cleaning, service, and support easier than ever and guarantees a long service life.
DLP printers use the light from a high-intensity 405nm LED that's selectively reflected off a digital micromirror device (DMD) projecting an image of each layer through a lens onto the bottom of the resin tray.
Featuring easy operation and uniform exposure, the Fab Cure maximises the mechanical & flexural properties of the parts during the final curing stages of production.
Every printer package is shipped complete with:
ACCUFAB-D1S 3D printer
AccuWare slicer software
144x81mm build plate*
2x resin tanks
Add the optional Fab Cure for $799+GST
* Build plate will have marks on the surface left over from QA test print.
396x406x755mm unit size
144x81x160mm build envelope
50mm/h build speed*
35µm print accuracy
25µm - 50µm - 100µm layer thickness
405nm DLP technology
Open material options
USB - Ethernet - WiFi interface
CURING UNIT FAB CURE
200x200x325mm unit size
165mm turntable diameter
160mm maximum part height
405nm UV LED
30W LED power
* Calculated at 100µm/layer, layer thickness and material will vary.
GENERAL MODEL RESIN
Dental Model DM12 is the ideal choice for printing separated models for crown and bridge applications.
The yellow colour offers maximum detection of margin lines and adjacent contours, and cleanup is easy thanks to the low viscosity of the resin.
ORTHODONTIC MODEL RESIN
Ortho model OD01 is an excellent choice for printing models for the fabrication of aligners and orthodontic applications.
The high heat resistance and hardness of OD01 allow the cured models to withstand abrasion and maintain accuracy over multiple uses.
GINGIVAL MASK RESIN
Gingiva Mask GM11 is an excellent choice for replicating gingiva contours for digital implant cases.
GM11 is a flexible material that can assist in planning the emergence profile for digital implant restorations.
SURGICAL GUIDE RESIN
Surgical Guide SG01 is a clear and biocompatible resin intended for printing dental surgical guides.
SG01 is a rigid polymer with minimal flex, which allows it to maintain its form during dental surgeries.
Dental Cast DC12 is a printable wax-like photopolymer specially developed for investment casting.
DC12 burns out clean and can also be used in pressed ceramic applications.
CUSTOM TRAY RESIN
Tray TR01 is a biocompatible material with a high elastic modulus making it an outstanding choice for printing custom trays.
Its biocompatibility makes it safe for short term intraoral use.
The build plate is self-levelling and easy to use, while the doctor-friendly software, menus, and intuitive navigation make working with the AccuFab-D1s a first-class experience.
AN OPEN RELATIONSHIP
Use ours or someone else's resin – the AccuFab-D1s is compatible with all 405nm printer resins.
Patented pixel distortion correction algorithm and full HD 1080p projector guarantee ultra-fine print accuracy and details as high as ±35μm
Depending on the part's intended use, you can select between 25, 50 and 100µm layer thicknesses – allowing you to make an indication-specific trade between speed and accuracy.
Digital Light Processor printers use the light from a high-intensity 405nm LED that's selectively reflected off a digital micromirror device (DMD) projecting an image of a layer through a lens onto the bottom of the resin tray, the build plate then moves up a layer and the process repeats until each layer is complete.
BOOK A DEMO
Want to check it out in person?
We can do the demo virtually or you can come to our office.
Click the Book a demo button below and complete the online request.
Once you click submit, our office will get in touch ASAP.
When you buy the ACCUFAB-D1S 3D printer from Osseo Group, you'll receive everything you need to start printing for just $11,990 plus GST.
There are no ongoing software costs associated with the printer like license fees or upgrades.
READY TO GO?
If you've already made up your mind, you can order yours online – There’s no waiting, phone calls, emails, or arduous paperwork required!
It's always in stock and usually arrives in 15-20 business days.